EVENTS & SHOWS

150 ft. NEW ENGLAND KERNMANTLE ROPE - 12MM

Static kernmantle ropes are a good choice for rescue and descending activities. They are designed to provide high strength with low stretch and good abrasion resistance. This rope has a polyester mantle cover over a continuous filament, low twist nylon...

ROLLGLISS R550 200 FT.

The 200 ft. DBI-SALA Rollgliss R550 Rescue Unit with a built in rescue wheel offers fully automatic and controlled descent for fast and reliable emergency rescue and evacuation from a wide variety of elevated work areas with minimal training. The...

RESCUE REACH POLE

6-24 ft high strength pole. Made of aluminum tubing which resists bending. Collapses to easily fit in a truck compartment. Comes with three stage auto lock carabiner and attachment sling. Great tool for clipping out of reack anchors. Useful in various...

PMI XTRA BACKBOARD

This patented backboard has been designed to provide 100% x-ray translucence while maintaining the necessary rigidity to protect the patient from further injury during transport. A fully sealed one-piece construction makes it fluid resistant while the...

PITAGOR TRI HARNESS

PITAGOR Evacuation triangle with shoulder straps. Shoulder straps make it easy to put on. Adjusts on the victim with self-locking DoubleBack buckles

SKEDCO HALF SKED

The Half-Sked was designed to assist in extricating patients through narrow passages where some bending of the patient is required. Half-Sked is half the length of the standard Sked and the same width. This short length allows the patient to bend at the...

SKEDCO SKED BASIC RESCUE SYSTEM

The original and still the best rescue stretcher for confined space, high angle or technical rescue, and traditional land based applications. The Sked stretcher is a revolutionary design which provides outstanding patient protection and security. The...

PETZL CORDEX CLIMBING GLOVES

Lightweight belay/rappel gloves   These lightweight belay/rappel gloves combine the durability of a work glove with the precise fit and dexterity of a thinner glove. Double-layered leather protects the palm and other high-wear areas. The back is made of...

ISC RP 880 D4 WORK RESCUE DESCENDER

The NEW D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds. The progressive cam works by way of one cam operating inside another cam. The D4 has a 240kg (530lbs) Working load limit...

ISC RP815 ROPE ADJUSTING DEVICE RAD

The RAD (Rope Adjustment Device) is a multi-functional device which can be used as part of a work-positioning lanyard.  The RAD can also be used for ascent, descent and work positioning/restraint, belay and progress capture.  The 'squeeze style' device...

ISC D5 WORK/RESCUE DESCENDER

The D5 Descender has been designed for use on 1/2" (12.7mm) rope. The D5 is EN12841:2006/C and is compliant with NFPA G and ANSI Z359.4:2013 and developed for the North American Fire & Rescue and Tower Climbing markets, which typically use...

ISC RP 500 ROCKER ROPE GRAB

The Rocker can be fitted to the rope at any point.  It can be used hands-free, when travelling up and down the rope.  The Rocker has been designed for use without a Shock-absorber. The Rocker can also be used as a Rope Adjuster on a Work Positioning...

**DISCONTINUED** SL TECH ROPE ASCENDERS LEFT HAND

Specifications Material: Aluminum & stainless Weight: 165g Rope diameter: 8-13mm Standards: CE EN 567

ISC RP 300 SMALL RIGGING PLATE

ISC Rigging Plates are made from high strength Aluminium and have 20mm (over 3/4") holes, to allow carabiners to be fully rotated.

ISC RP 320 LARGE RIGGING PLATE

ISC Rigging Plates are made from high strength Aluminium and have 20mm (over 3/4") holes, to allow carabiners to be fully rotated.

ISC RP 037 FIXED MICRO PULLEY

The RP037 Micro Pulley has a 12kN Rated Bridge

ISC R-ALF AUTO LOCKING RESCUE HAULER

Specification(s) Material: Aluminium, Steel Unit weight :1243g (44oz) Work Load :250kg (550lbs) Rope Diameter: 11mm approved EN1891-A SPECIFICATIONS

ISC KH311TL OVAL CARABINER

Gate options:SG- ScrewgateThe KH311 Oval carabiner has a hooked nose as standard.   We have now introduced a KEYLOCK (anti-snag) nose KL311, available in SG- Screwgate, SS- Supersafe and TL- Twistlock gate options. *prices vary

**DISCONTINUED** SL TECH SUPER SLIDER I-BEAM TEMPORARY ANCHOR

The Climbtech I-Beam Anchor is a removable and reusable sliding I-Beam Anchor, which is easy to place, adjust and move.  The anchor is deigned to easily slide along the beam, trailing the worker. This Slider features an increased adjustable width...

ISC HAULERBINER RESCUE KIT

Specifications Carabiner: 3 stage lock in aluminum Break Strength: 16kN (3596lb) Total lift length: #HB105A (1m) , #HB165A (1.65m) Weight: 575g Max rated load: 140kg (308lb)

ISC SMALL SINGLE SL TECH PULLEY

Material: Aluminum Weight: 87g Break strenght: 30 kN Rope diameter: 7-13mm

SL TECH HORNET - EYE TO EYE FRICTION HITCH - 26"

Materials: Exterior made of Technora & polyester, Interior made of vectran Diameter: 10mm (3/8’’) Break Strength: 22kn (Static pull test) Sewn eye on each end to insert a carabiner Resistance to abrasion

ISC BLACK CARABINER

Material : Steel Break strength : 40kn (8800lbs) Gate : Auto-Lock, ANSI 3600 lbs Weight: 193 g Opening: 17mm Diameter: 108mm (4.25’’) x 56mm (2.25’’)

ISC N 248 STEEL CARABINER

Material: Steel Weight: 299g Break strength: 50kN Opening: 24mm 3 Stage lock (16kN)