|| FALL PROTECTION & RESCUE ||

ERGODYNE ARSENAL LARGE CANVAS HOISTBUCKET WITH D-RINGS

Maximum safe working capacity: 150lbs (68kg). Maximum safe tool tether anchor capacity on each attachment: 20lbs (9kg) 12.5in diameter (32cm), 17in height (43cm) Molded plastic top ring to maintain wide opening for viewing and accessing contents

KLEIN TOOLS STRAIGHT BUCKET, 150 LB, 15 X 12 IN, CANVAS

Load rated: 150-pounds (68 kg) Web strap extends down the side of the bucket Heavy duty plastic bottom with drain holes Made in the USA

HIIGARD 50 VERTICAL LIFELINE

Material: Polyester & Polypropylene Length: 15.25m (50′) Braid: 3 Twisted Strand Rope Snap Hook: Steel with zinc plated CSA approved, opening 21mm /5/8’’) Capacity: 140kg (310lbs) Elongation under a 1800lbs (8kn) load wet and...

HIIGARD ANCHOR STRAP WITH WEAR PAD & DEE RING ON END

Material: Polyester Dee ring: 55mm (2.17”) – 81mm (3.18’’) Length: 0,91 m (3’), 1,83 m (6′) Beak strength: 2268kg (5000lb) Standard: ANSI Z359-18-2017, EN795, CSAZ259-15 Individual Serial Numbers

HIIGARD VERTICAL LIFELINE ROPE GRAB

The HiiGARD vertical lifeline rope grab with shock absorber, is device fall-arrest device contains anti-panic feather has been tested to work in compliance with HiiGARD vertical synthetic 3 strand 16mm (5/8’’) rope. The construction of CSA...

PEAKWORKS SA-54022-6 SHOCK ABSORBING TWIN LEG LANYARD - SNAP & FORM HOOKS- 6' (1.8M)

• SP (Shock Pack) lanyards are comprised of "tear webbing" which is woven in a manner that allows the webbing to tear when it has a load applied to it. This tearing absorbs a significant amount of downward force under load, reducing injury. This...

FERNO RESCUE EMERGENCY DUMMY (F.R.E.D.)

The Ferno Rescue Emergency Dummy (F.R.E.D.) is the ideal training aid to simulate the handling and carrying of a person during rescue situations. The dummy can be filled with a sand/sawdust mixture up to 121 lbs. to simulate the weight of an adult. F.R.E...

MILLER STEEL CABLE GRAB FOR 5/16 €“ 3/8 WIRE.

Material: Stainless steel, Aluminum, Nylon Capacity: 310lbs

ELK RIVER TOWER HARNESS PEREGRINE PLATINUM SERIES TOWER HARNESS

ELK RIVER’S Peregrine Platinum Series Tower harness is a body belt harness combo that has as a feature a suspension hard seat. For some tower climbers which desire a more flexible seat the aluminum bar can be removed to achieve this option...

MILLER FALCON EDGE SELF-RETRACTING LIFELINE, 30', GALVANIZED STEEL, SWIVEL

  Description Designed to protect a worker in applications where the lifeline could come in contact with an edge, in the event of a fall, or where foot level tie-off is needed Features an integrated shock-absorber pack attached to the end of the...

METOLIUS SUPERCLIP REACH POLE CARABINER ADAPTOR RESCUE TOOLS

A handy stick clip for hanging or retrieving quickdraws, or clipping a rope into pre-hung draws to protect a climber from a potential ground fall. The simple design can be used with any non-locking climbing carabiner. Made from stainless spring steel...

BUCK FIRST AID KIT BLOOD STOPPER

D-ring Can easily be clipped to any accessory snap or gear loops on the saddle/belt. Snap The small aluminum snap may be clipped to any accessory ring or gear loops/hangers on the saddle/belt. Web Loop The web loop may be hooked to...

ARSENAL PLASTIC BOTTOM CANVAS TOOL BUCKETS, CANVAS, 12.5" DIA. X 15" H, 100 LBS. LOAD RATING

Description Bucket with rope handle High wall, heavy-duty construction Molded plastic base and top ring Interior pocket Available with safety tops to prevent tools and equipment from falling when hoisting them to an at-heights job site

SMC LITE ALLOY STEEL LOCKING CARABINER

Lite Alloy Steel Locking D is without question the most popular carabiner that we manufacture. You’ll have to look long and hard for a lighter weight steel carabiner that meets the NFPA “G” ratings. Aptly described as a...

SPEC PAK SPREADER BAR

Spec Pak Spreader Bar was designed for Wind Turbine rescue techniques that require horizontal transfer of a patient. Spreader Bar is connected to Cchest D-rings on Spec Pak. This technique utilizes two 4:1 Mini Haul or AZTEC kits attached to the swival...

PETZL MICRO TRAXION

DETAILS Ultra-compact and lightweight Versatile:- toothed cam with self-cleaning slot optimizes performance under any conditions: frozen or dirty ropes...- may be used as simple pulley by locking the cam in the raised position Aluminum sheave...

100 PLASTIC PADLOCKS TAMPER PROOF SECURITY SEALS

Anti-tamper: once the security padlocks locked, it cannot be opened unless the wire is cut, show evidence of tampered and unauthorised use Tracking and Traceability: each padlocks are printed with progressive unique number to ensure your sealed...

**DISCONTINUED** 3M DBI SALA TOWER BODY BELT & HARNESS COMBO WITH HARD SEAT

Material: Polyester Sizes: S, M, L & XL Dee ring: APL Buckles: Quick connect Standards: CSA Z259 10

SL TECH DETACHABLE ROPE GRAB FOR STATIC ROPE

Specifications Material : Aluminium Break Strength : 15kn Unit weight : 181 g Max Rope size : 11mm (7/16’’)

HIIGARD FALL PROTECTION LANYARD WITH SMALL SNAP HOOKS

HiiGARD fall protection lanyard. This lanyard assembled with small steel snap hooks on each made with the highest grade of polyester webbing made to resist all rigorous construction work activities. To avoid pre-retirement of lanyard due to un-readable...

ECONOMIC HARNESS AND BODY COMBO BY PROTECTA

Specification(s) Material: Polyester webbing, steel hardware Sizes: Small 1161204C, Med-Large 1161205C, Xlarge 1161207C Group: AP Buckles: Tongue buckle leg straps Weight capacity : 190 kg (420 lb) Standard : CSA Z259.10

EYOLF SKATER SEAT

The Skater work seat got its name from the fact that everyone who sees the wooden seat immediately gets reminded of a skateboard. Being that in Canada woodworking is everywhere so the choice originally to go for a wooden seat wasn’t impossible...

KLEIN BOLT BAG, TOP CLOSING TOOL POUCH WITH TUNNEL CONNECT, 5 X 10 X 9-INCH

Bolt Bag has durable 3-Inch 7.6 cm) drawstring closing top to prevent items from falling out of pouch at height Same durability as Klein 5416 Series bull pin and bolt pouch Pouch constructed of heavy-duty No. 4 canvas Bolt bag with standard bull-pin...

KLEIN TOOL BAG, BULL-PIN AND BOLT BAG, TUNNEL LOOP, CANVAS, 5 X 10 X 9-INCH

Tool Bag contructed of No. 4 canvas with double bottom for added durability Bolt bag with bull-pin loop on each side Stitched and riveted for added strength Tunnel loop belt connection